1. Usb Serial Port (com9) Driver Updater
2. Prolific Usb-to-serial Comm Port (com9) Driver
3. Usb Serial Port (com9) Driver License

599 / Eagle USB Driver Install Release 2.000 – February 28, 2011 Part #74461 Printed in USA 7 During the installation process, a virtual serial comm port number was assigned to this physical USB connector when the Eagle is connected. In order to control or update the Eagle, the control program needs to be set up with the. Plugin the USB serial adapter using a USB cable. Wait for it to be connected and find “USB-Serial Ch340 (COM9)” in Device Manager: In the case where you cannot find it, click here to download the driver. Download Prolific USB-to-Serial Comm Port for Windows to ports driver. Download Prolific USB-to-Serial Comm Port for Windows to ports driver. Join or Sign In. Sign in to add and modify your software.

Usb Serial Port (com9) Driver Updater

The instruction below introduces a creative thinking on directly load BMW ICOM Rheingold ISTA-D ISTA-P diagnostic & programming software on cheap INPA K+D CAN cable (FTDI based cable with FT232RL chip) instead of WIFI BMW ICOM A2+B+C emulators.

'USB Serial Device' sample for 9B96 board requires 'Virual COM port driver'. From readme.txt: 'For WindowsXP or Vista, usbdevserial.inf should be used.' This inf works under 32-bit Windows, but not for 64. Download driver of version 3.3.11.152:https://mega.nz/#!xkdxzapB!S-A01Ea1F3qGCVPhdpk-uE5TXQTPuiAbYCmTHgnRZ0.

Tool needed:
BMW INPA K+ DCAN cable (Cheap $17.99)
Or 20-pin to 16-pin cable for BMW with 20 pin connector
BMW ICOM Rheingold ISTA-D ISTA-P software HDD
NOTE: The BMW INPA cable comes with software CD can only do diagnostic function, but if loaded with Rheingold software, it will do programming function as well. For BMW ICOM software, we recommend 2015.1V Rheingold ISTA-D 3.47 ISTA-P 54.3 software HDD which performs more stable.

Configuring Rheingold ISTA on K+DCAN cable:

1. Plug the INPA cable and install drivers. For FTDI based cables use latest drivers.
You can download driver here: www.ftdi.com

2. Set COM port. Open “My Computer”>> “Manager” >> “Device Manager” >> “Ports” >> “USB Serial Port (COM3)” >> click on “Port Setting” tab and click “Advanced”
Change the com port number to COM9 and latency time to “1”. Confirm configuration with OK button.

3. Open C://EDIABAS/BIN/EDIABAS.INI with Notepad and check for “Interface=STD:OBD”
Set “Port=6801” in TCP settings.
4. Open C://EDIABAS/BIN/EDIABAS.INI with Notepad and check for “Port=Com9”
5. Connect the INPA K+D CAN cable with PC and the other end with car via OBD socket
6. Now run BMW ICOM Rheingold software shortcut in start menu, wait until it boots, then press “Settings” button on the top
7. Select “VCI Config” tab and tick “Ediabas standard settings (ediabas.ini)”, then press “OK”
8. Go “Operations” program, then “Read Out Vehicle Data” and “Complete Identification”
9. Configuration is done. Start using the Rheingold software.

Prolific Usb-to-serial Comm Port (com9) Driver

For most devices, the Ports device setup class and the Serial function driver provide the functionality required to operate serial ports and COM ports. To install serial ports and COM ports using these system-supplied components, do the following:

• Provide an INF file that specifies the Ports device setup class and the Serial function driver as the service for the port.

• To configure a serial port as COM port, comply with the requirements that are defined in Configuration of COM Ports.

Usb Serial Port (com9) Driver License

For more information about installing serial ports and COM ports using the Ports device setup class and the Serial function driver, see the following topics:

If you do a custom installation of a COM port, you must comply with the COM port requirements that are defined in Configuration of COM Ports.